Coining die, reduction of wear and sticking by Maxit® CrN-mod coating .
采用Maxit® CrN-mod涂层的硬币冲头， 可以有效解决磨损和材料粘附的问题。
Forging dies for making of connecting rod, plasmanitrided and Maxit® CrN coated for reducing abrasive wear.
连杆锻压模具经过离子氮化与Maxit® CrN涂层可以减少磨损。
Reduction of lubricant and improved service lifetime by polishing and Maxit®CrN coating
通过抛光和Maxit® CrN涂层可以减少润滑剂的使用和延长使用寿命。nextpage
High stress, friction between die and material , sticking and cold welding are the main factors that affect the quality and service lifetime of metal forming and blanking dies. Polishing and Maxit® coatings are good solutions to solve the problems above in mass production.
高应力，材料流动摩擦，材料粘结，冷焊是影响金属成型模具质量稳定和寿命的主要因素。抛光与PVD涂层是解决上述生产中问题的有效途径。
Abrasive wear protection by high hardness coating;
通过涂层的高硬度来减少工作面的磨料磨损;
Reduction of chemical reactions between tool and material;
减少模具与加工材料之间产生化学反应;
Reduction of cold welding tendency;
减少冷焊倾向;
Perfect surface quality;
保持工作面处于理想状态;
Lower lubricant consumption by lower friction coatings.
通过低摩擦系数涂层来减少润滑剂的消耗。
