机型 | MA | |
17 | 20 | | | | |
series | series | | | | |
CAPACITY |
Swing over bed | 17” | 20” | | | | |
(430mm) | (510mm) | | | | |
Swing overcross slide | 10.4 | 13.5” | | | | |
(260mm) | (340mm) | | | | |
Swing over gap | 24-1/2” | 27-1/2” | | | | |
(685mm) | (760mm) | | | | |
Length of gap from | | |
head stock |
Center distance | 33.5” | 43.3” | 63” | 82.7”2100 | 102.4”2600 | 122” | |
850 | 1100 | 1600 | 3100 |
HEADSTOCK |
Spindle nose | D1-6 or A1-6, D.8 or A1-8 | |
Spindle bore | 2-9/16” Ø65(std.) 3 1/4”Ø83(opt.) | |
Spindle speed | 12 speed, 36-1800rpm | |
(36, 50, 72, 105, 130, 180, 250, |
375, 620, 880, 1220, 1800) |
Main motor | 71/2HP(std) 10HP(opt) | |
THREADS AND FEEDS |
Range of threads | 4 TPl or 6mm pitch | |
Threads cutting (NO.), | 18 kinds 0.3-3.5mm | |
range-M.P. |
Threads cutting –D.P. | 21 kinds 8-44dp | |
Longitudinal feeds | 0.002-0.016” (0.05-0.4mm) | |
Cross feeds | 0.0008-0.006” (0.02-0.15mm) | |
Rapid traverse-longitudinal, cross | | |
CARRIAGE |
Cross slide travel | 12” (305mm) | |
Compound slide travel | 5” (130mm) | |
TAILSTOCK |
Diameter of quill | Bitmap | Bitmap |
Taper of center | MT#4 | |
Bearing surface on ways | 10”(250mm) | |
BED |
W (Auxiliary guide) | 330mm | |
NET WEIGHT | 4400lbs | 5000lbs | | | | |
(2000kgs) | (2300kgs) | | | |