| 机型 | | PA |
| 35 | 40 | 45 | 50 |
| series | series | series | series |
| 加工能力 |
| 床身上旋径 | | 35” | 39-3/4” | 44-3/4” | 50-1/8” |
| (880mm) | (1010mm) | (1135mm) | (1275mm) |
| 滑座上旋径 | | 24” | 29-1/8” | 34-1/4” | 39-3/4” |
| (610mm) | (740mm) | (870mm) | (1010mm) |
| 床隙上旋径 | | 52-3/4” | 57-3/4” | 63” | 68-1/2” |
| (1340mm) | (1470mm) | (1600mm) | (1740mm) |
| | 23-3/4” (600mm) |
| 床隙宽度 |
| 两顶心间距离 | | 60”-800” (1500-20000mm) |
|
| 主轴头 |
| 主轴鼻端型式 | | A2-11, A2-15, A2-20, A2-28, SPECIAL |
| 主轴孔径 | | 153mm,230mm,318mm,360mm,410mm,510mm |
| 主轴转速 | | 5-630, 4-500, 3-400, 2.5-300, 2-250, 1.5-180 |
|
|
| 主电机 | | 20HP(std) 30/40HP(opt) |
| 螺纹进给范围 |
| 英制公制螺纹 | | 2/1-28TPI (60), 1-56mm(60) |
| | M.P. 0.25-14(60) |
| 模式螺纹 |
| 径节螺纹 | | D.P.0.2-112(60) |
| 纵向进给 | | 0.0017 IPR-0.095 IPR, 0.042~2.4mm |
| 横向进给 | | 0.009 IPR-0.0481 IPR, 0.02~1.2mm |
| 纵向快速进给 | | 80”-40”/min (2000-1000mm/min) |
| 鞍座 |
| 横向滑座行程 | | 26-3/8” (670mm) |
| 附刀座行程 | | 450mm |
| 尾座 |
| 尾轴管直径 | Bitmap Bitmap | 4-1/2” (115mm) |
| 尾轴管锥度 | | MT#6 |
| 床轨滑动面 | | 19-3/4”(500mm) |
| 机器重量 |
| | 22”(26”)/560mm(650mm)x 26-3/4”(680mm) |
| 机器重量 | | 24200lbs (11000kgs) | 24970lbs | 25740lbs | 26510lbs |
| (11350kgs) | (11700kgs) | (12050kgs) |
.jpg.thumb.jpg)
