| 加工能力 | GENERAL CAPACITY | 型号(model) | CJK6120 |
| 床身上最大回转直径 | Max.swing diam. over bed | mm | 150 |
| 拖板上最大回转直径 | Max.swing diam. over drag board | mm | 76 |
| 棒料通过直径 | 液压卡盘 | Max.diam.of through-hole | Hydraulic chuck | mm | 30 |
| 手动卡盘 | Manual chuck | mm | 30 |
| 筒夹 | Collet | mm | 30 |
| 螺纹加工范围 | 公制 | Thread processing range | mm | 0.25～8 |
| 英制 | thread/inch | 3～80 |
| 卡盘尺寸 | Chuck size | inch | 5" |
| 主轴转速 | Spindle speed | rpm | 300～3000 |
| 主电机功率 | Main motor power | kw | 3 |
| X/Z轴 | X/Z axis | | | |
| 行程 | X轴 | Travel | X-axis | mm | 220 |
| Z轴 | Z-axis | mm | 250 |
| 最大移动速度（伺服） | X轴 | Max. travel speed (servo) | X-axis | mm/min | 5000 |
| Z轴 | Z-axis | mm/min | 10000 |
| 最大移动速度（步进） | X轴 | Max. travel speed (stepping) | X-axis | mm/min | 3200 |
| Z轴 | Z-axis | mm/min | 6000 |
| 驱动电机转矩（伺服） | X轴 | Drive motor torque(servo) | X-axis | Nm | 4 |
| Z轴 | Z-axis | Nm | 4 |
| 驱动电机转矩（步进） | X轴 | Drive motor torque(stepping) | X-axis | Nm | 12 |
| Z轴 | Z-axis | Nm | 15 |
| 刀架 | Turret | | | |
| 刀架类型 | Type of turret | | 排刀Tool post |
| 刀位数量 | No.of station | nos | 3--8 |
| 刀杆横截面 | Tool cross section | mm | 16?16 |
| 精度 | Accuracy | | | |
| 主轴径向跳动 | Vertical spindle vibration | mm | 0.01 |
| 主轴轴向跳动 | Horizontal spindle vibration | mm | 0.01 |
| 定位精度 | X轴 | Positioning of axes | X-axis | mm | 0.03 |
| Z轴 | Z-axis | mm | 0.032 |
| 重复定位精度 | X轴 | Repeatablility of axes | X-axis | mm | 0.012 |
| Z轴 | Z-axis | mm | 0.013 |
| 最小设定单位 | Min.**p unit | mm | 0.001 |
|
| 标准配置Standard configuration | 夹紧方式Clamping | 手动筒夹 |
| Manual collet |
| 可选配置(Optional Configurations) | 气动夹紧(筒夹) | Pneumatic collet | 可选Optional |
| 液压夹紧(筒夹) | Hydraulic collet | 可选Optional |
| 手动卡盘 | Manual chuck | 可选Optional |
| 液压卡盘 | Hydraulic chuck | 可选Optional |
| 液压尾座 | hydraulic Tail Stock | N/A |
| | | | | |
| 液压系统(可选) | Hydraulic system(optioanl) | | |
| 公称压力 | Nominal pressure | MPa | 3.5 |
| 容量 | Capacity | ltr | 50 |
| 液压油泵电机功率 | Hydraulic oil pump motor power | kw | 0.75 |
| 尾座 | Tailstock | | | |
| 尾座套筒锥度 | Cone of tailstock sleeve | | N/A |
| 尾座套筒直径 | Diam. Of tailstock sleeve | mm | N/A |
| 尾座套筒最大行程 | Max.stroke of tailstock sleeve | mm | N/A |
| 自动润滑泵电机功率(可选) | Lubricating oil pump motor power(optional) | w | 40 |
| 冷却泵电机功率 | Cooling pump motor power | kw | 0.04 |
| | | | | |
| 其他可选配置 | Other optional configuration | | |
| 自动机械手 | Automatic manipulator | | 可选Optional |
| 送料器 | Parts feeder | | 可选Optional |
| 自动排屑机 | Automatic chip cleaner | | N/A |
| 车床大小 | Machine dimention | | | |
| 外形尺寸（长*宽*高） | Overall dimension (LxWxH) | mm | 1420*920*1450 |
| 净重（约） | Net weight (Approx) | kg | 1000 |
