| 规格Specifications | Gap | Straigh | Gap | Straigh | Gap | Straigh | Gap | Straigh |
| C6232D | C6132D | C6236D | C6136D | C6240D | C6140D | C6250D | C6150D |
| 中心高 Ceer heigh | 160mm | 180mm | 200mm | 250mm |
| 床身上最大工件直径 Max. Swing over bed | 320mm | 360mm | 400mm | 500mm |
| 刀架上最大工件直径 Max. Swing over caiage | 190mm | 190mm | 210mm | 210mm |
| 马鞍槽最大工件直径 Max. Swing igap | 520mm | - | 540mm | - | 560mm | - | 590mm | - |
| 马鞍槽有效长度 Effective gap length | 200mm | - | 200mm | - | 200mm | - | 200mm | - |
| 最大工件长度 Max. Length of work piece | 500mm or 750mm or 1000mm or 1500mm |
| 主轴孔锥度 Spindleape | MT 6 |
| 主轴通孔直径 Thru-hole of spindle | 52mm |
| 转速范围 Spindle speeds | 30—1600/mi(12 steps) |
| 横刀架行程 Crossravel | 240mm |
| 小刀架行程 Compoundravel | 140mm |
| 尾座**行程 Tail stock ceer sleeveravel | 90mm |
| 尾座套筒锥度 Tail stock ceer sleeveape | MT 4 |
| 电机功率 Moto | 3/4KW |
| 公制螺纹 Range of metrichreads (kinds) | 0.45-20mm(30) |
| 英制螺纹 Range of inchhreads(kinds) | 80-1.75/ I” |
| 纵向进给量 Long. Feed per spindleev. | 0.04-2.16mm |
| 横向进给量 Cross feed per spindleev. | 0.02-1.08 mm |
外形尺寸| Overall dimensions for 500mm | 1700*1130*1200 mm |
| Overall dimensions for 750mm | 2000*1130*1540 mm |
| Overall dimensions for 1000mm | 2250*1130*1540 mm |
| Overall dimensions for 1500mm | 2800*1130*1540 mm |
净重| Neweighof 500mm | 1200kg | 1300kg | 1500 kg |
| Neweighof 750mm | 1400kg | 1500kg | 1700kg |
| Neweighof 1000mm | 1500kg | 1600kg | 1700kg |
| Neweighof 1500mm | 1700kg | 1800kg | 2000kg |
