|
|||||||||||||||||||||||||||
K6140| CK6140/1000 | |||
| 序号 | | 单位 | CK6140 参 数 |
| 1 | 最大回转直径swing over bed | mm | Φ400 |
| 2 | 最大切削直径Maximum cuing diamete | mm | Φ400 |
| 3 | 最大加工长度maximum machining length | mm | 1000 |
| 4 | X/Z轴最大行程Maximumravel of X/Z axis | mm | 220/1000 |
| 5 | X/Z 轴最小位移单位Minimum displacemenuniof X/Z axis | mm | 0.001 |
| 6 | 主轴通孔直径Spindle bore | mm | Ф52 |
| 7 | 主轴内孔锥度spindleape | | M5 |
| 8 | 主轴级数Spindle series | | 无极变速/档内无极 |
| 9 | 主轴极限转速Spindle limispeed | pm | 20-2600/20-1600（选配） |
| 10 | 工件夹紧方式Workpiece clamping method | mm | 手动 |
| 11 | 主电机功率Maimotor powe | kW | 5.5 |
| 13 | X/Z轴X/Z axis | N.m | 4/6N.M |
| 14 | X/Z轴快移速度Fasmoving speed of X/Z axis | m/min | 5/8 |
| 15 | 刀杆尺寸Arbor Size | mm | 20×20 |
| 16 | 刀架重复定位精度Repetitive positioprecision | mm | ≤0.004 |
| 17 | 尾座型式Tailstockype | | 手动hand movemen(HM) |
| 18 | 尾座套筒直径Quill Diamete | mm | Φ65 |
| 19 | 尾座套筒行程Travel ofailstock sleeve | mm | 140 |
| 20 | 尾座锥孔Taperype ofailstock quill | | 莫氏4# |
| 21 | 机床外型尺寸（长×宽×高）Dimensions of machineools (length, width, height, height) | mm | （2200mm/2500/3000）×1500mm×1800mm |
| 22 | 电力需求（功率/电流)Power demand (power / cue) | kW/A | 9kW/20A |
