LH-AUTO
LH-AUTO
*Y轴底座固定,Z轴随X轴滑座移动,工作范围为XZ平面;
*立臂高度建议不超过400mm;
*适用于垂直面内两维工件搬运,移载,行走轨迹等应用。
*The X axis is fixedohe base,the Zaxis withhe X axis sliding seamoveme.the scope of work forhe XZ plane.*The vertical arm extensioadvice ofomoreha400mm.*Suitable for verticaload surface withithewo dimensioworkpiece handing,transfer,walkingrajectory applications.
LH-AUTO
LH-AUTO
LH-AUTO 多轴组合方式:
东莞LH-AUTO公司简介:
LH-AUTO合作伙伴:
为了确保选型无误和使您的项目能达到效果,请把您的设计需求告之我们,由LH-AUTO配合您提供工业机械手的设计方案,关于选型部分可以在线提交