南澳电气 NAWT 无线高压核相仪

NAWT Wireless High-voltage Phasing Teste   NAWT无线高压核相仪

产品简介

NAWT无线高压核相仪，应用于电力线路、变电所的相位校验和相序校验，具有核相、测相序、验电等功能具备很强的抗干扰性，符合（ EMC ）标准要求，适应各种电磁场干扰场合。将被测高电压相位信号由***器取出，经过处理后直接发射出去。由核相仪接收并进行相位比较，对核相后的结果定性。因NAWT无线高压核相仪是无线传输，真正达到安全可靠、快速准确，适应各种核相场合。

产品别名

核相仪、核相装置、无线核相器、高压核相器、高压核相仪、语音核相器(仪)、无线核相仪

产品特性

1、屏幕显示内容：无线高压核相仪，不同相、同相、频率、X、Y、 、 、。

2、电源：主机采用可充电电源，X和Y***器 采用5节AG10电池。

3、自动关机：开机后8分钟左右主机会自动关机 。

4、接触被测强电场时，仪器会自动报警。

产品参数

①准确度：同相误差≤15°，不同相误差≤15°

②采样速率 3次/秒

③X和Y***器电源电压为7.5V±1.5V

④X和Y***器工作电流≤5mA

⑤主机和 X、Y***器的视距传输距离为X、Y≥20m

⑥工作环境：0℃┉+50℃湿度：≤85%RH

⑦储存环境：0℃┉+55℃湿度：≤85%RH

⑧本产品所测电压等级为 0.38KV┉220KV

安全事项

1、现场测试时，操作人员应按电力部门高压测试安全距离标准进行操作。

2、所测试绝缘杆电压等级为 ≤220KV。

3、（特别注意：每次使用前请认真检查绝缘杆的绝缘性能，注意天气情况，严格遵守国家高压试验的相关规定！）

4、使用时应认真执行本单位安全规章制度，并严格遵守DL408-91安全工作规程（发电厂变电所电气部份）相关规定，仔细保管仪器，定期检查绝缘。

5、绝缘杆为6节伸缩式，在使用时，不管工作电压是否为**电压，均要把伸缩绝缘杆拉到最长状态（约3.2米），握手时只能握在第六节上，不得在第五节上握手。

Produciroductio

NAWT Wireless High-voltage Phasing Tester , used ipower lines , substations and phase sequence phase check verificatio, withuclear phase , phase sequence,electricalinspectioand other functions with a strong ai-ierference, compliance (EMC ) standards, adapto various electromagnetic ierference occasions . High voltage phase signal willbemeasured bythe collector ouemied directly afterhereatmen. Received byheuclear phase andhe phase compariso,heesults forheuclear phase characterization.BecauseNAWT Wirelesshigh-pressureuclear phase meter is a wirelessransmissio,hereby achieving safe,eliable, fasand accurate , adapto variousuclear phase occasion.

Also called name

Nuclear phase meter ,uclear phase devices, wirelessuclear phase device, high-voltageuclear phase device, high-voltageuclear phase meter , voiceuclearphasedevice,wirelessuclear phase device

The Characteristics ofhe products

1.NAWT Wireless High-voltage Phasing Tester adopting large-capacity and maienance-free baery, which completely solvehe disposable electricity shortageandtroublesomereplacemenfor carbobaery, buobaeries and other disposable baery, especially suitable for field work ; withouloadinghe baery, so idoocause spark ,hereforethedevicecomplies with safety  mining equipmensafety designing.

2.Ithe long-distanceesting,he visibleange will upo 200m, and cabe usedhroughhe walls.

3.The phase, waveform, and frequency date will be showed othe LCD screen,heesting is quite safe,fasandeliable, witheal female voice broadcasting.

4.Adoptingheelescopic insulatingod , is portable and easyo use,he insulatioperformance meetequiremes of electric insulatiowithstandesting.

5.The portableeceiver with elegandesigandon-slipreatmenprocess

6.Theotal device adopts advancedechnology, small and light.

The parameters ofhe products

① Accuracy: phase eo≤15°, differenphase eo≤15°

② Samplingate 3imes / sec

③ X and Y collector supply voltage is 7.5V±1.5V

④ X and Y collector cue≤5mA

⑤ hosand X, Y acquisitiothe sightransmissiodistance of X, Y≥20m

⑥ working environmen: 0° ┉+50°humidity :≤85% RH

⑦ storage environmen: 0° ┉+55°humidity :≤85% RH

⑧ he producofhe measured voltage level of 0.38 KV┉220KV

Power supply: AC110V/115V/120V/127V/220V/230V/240V, caoptional

Inpufrequency: 50Hz/60Hz optional

Note: Our users caselecthe coesponding power which based otheir local supply voltage and frequency, and we will confirm ibeforehe delivery (or inform ushahegoodswill be used iwhich coury advance)

Safety issues:

1.Whileesting on-site,he operator shall stay ia safe distanceo operate.

2.Theested insulatingod voltageating is ≤220KV.

3.( Special aeion: Please checkinghe insulatiorod carefully before using, pay aeiotohe weather, please striccompliance withheelevanationalhigh-voltagetestingegulation! )

4.Should eaestly implemehe safetyules andegulations, and strictly comply withheelevanprovisions of DL408-91 safetyegulations (Electrical PowerSubstationpart),keepinghe instrumes carefully and checkinghe insulatioregularly.

5.The insulatiorod is 6elescopicod , wheiuse,egardless ofhe operating voltage ishe highesvoltage , are putelescopic insulatingod pulled up state (about3.1meters ) , gripinghe SectioVI, can'oSectioV.