项目Items | 单位Unit | CT61100 | CT61125 | CT61160 | |
床身最上大工件回转直径 Max.swing dia.overbed | mm | 1000 | 1250 | 1640 | |
滑板上最大工件回转直径 Max.Swing over carriage | mm | 630 | 865 | 1250 | |
最大工件长度 Max.workpiece length | mm | 3000 , 5000 | |||
主轴通孔直径 Bore through spindle | mm | 100 | |||
主轴锥孔 Spindle taper | 公制 120 | ||||
主轴转速范围 Sprindie speed range | rpm | 1.25 – 315 (24级) | |||
进给量范围Range of feeds | 纵 向 Longitudinal | mm/r | 0.1 – 24 (64种) | ||
横 向 Cross | 0.05 – 6 (56种) | ||||
上刀架 Upper slide rest | 0.025 – 3 (56种) | ||||
公制螺纹范围 metric thread | mm | 1 – 240 (51种) | |||
英制螺纹范围 whitworth thread | PTI | 16 – 1/8 (33种) | |||
模数螺纹范围 module thread | mm | 0.5 – 120 (53种) | |||
径节螺纹范围 pitch thread | DP | 32 – 1/4 (41种) | |||
刀杆截面尺寸 Section of tool shank | mm | 45 x 45 | |||
尾座套筒直径 Quill dia | mm | 160 莫氏6号(More No.6) | |||
尾座套筒行程 Quill travel | mm | 300 | |||
主电机功率 Power of main motor | kw | 22 | |||
机床外型尺寸(长x宽x高) Overrall dimernsions | L=3m | m | 6.1x2.15x1.7 | 6.1x2.3x1.77 | 6.1x2.45x2.0 |
L=5m | 6.1x2.15x1.7 | 6.1x2.3x1.77 | 6.1x2.45x2.0 | ||
机床净重 Net weight | L=3m | t | 10.8 | 11.8 | 12.8 |
L=5m | 13.0 | 14.0 | 15.0 | ||
