ITEM | BML-280TY |
Capacity | Swing over bed | Ø 600 |
Max. diameter | Ø 240 |
Max. length | 420 |
Machine Body | Slant angle of bed | 60° |
Max. travel range of Z/X/Y-axis | 500 / 128 / ±30 |
Servo Motor of Z/X/Y-axis | 3 / 3 / 3 kW |
Rapid traverse rate of Z/X/Y-axis | 20 / 16 / 16 m/min |
| Spindle | Distance of spindle front bearing bore |
| C1:Ø100;C2:Ø80;
C1(OPT): Ø120 |
Diameter of spindle bore/Bar capacity | C1: Ø62 / Ø52;
C2: Ø45 / Ø35;
C1(OPT): Ø86 / Ø 75 |
Spindle nose type | C1:ASA A2-6;C2:ASA A2-5
C1(OPT):ASA A2-8 |
Taper of spindle bore | 1/20 |
Spindle motor | C1: 11 / 15 kW;
C2: 5.5 / 7.5 kW;
C1(OPT): 15 / 18.5 kW |
Spindle speed | C1: 8” chuck 4500 rpm;
C2: 6” chuck 6000 rpm;
C1(OPT): 10” chuck 3500 rpm |
Chuck diameter | C1: Ø8”, C2: Ø6”;C1(OPT): Ø10” |
Hydraulic Tailstock | Quill diameter | - |
Center taper | - |
Center stroke | - |
Turret | Type | Live Tooling |
Tool stations | STD: 8 | OPT: 12 |
Tool shank | ϒ 25 × 25 |
Drive Motor | Coolant motor | 960 W |
Hydraulic motor | 1.5 kW |
Chip conveyor motor | 0.2 W |
Miscellaneous | Power requirement | 208-220 Volts / 100 Amps / 3 Phases / 60 Cycles |
Dimension (W× D × H) | 3780 × 1960 × 2241 |
Packing dimensions (with chip conveyor) | 3840 × 2120 × 2400 |
Net weight | 6800 kg |
Gross weight | 7100 kg |
