技术参数Technical Specifcations
加工能力Processing capacity | DHD-800 | DHD-1200 | DHD-1600 | DH-2000 | ||
主轴数Spindle number | 单轴 | 单轴 | 单轴 | 单轴 | ||
转孔直径Borehole diameter | 3-30mm | 3-30mm | 3-30mm | 3-30mm | ||
转孔深度Drilling depth | 800mm | 1200mm | 1600mm | 2000mm | ||
机床行程Machine tool travel | ||||||
工作台左右行程(X轴)Work around Taiwan travel (X axis) | 800mm | 1050 mm | 2100 mm | 2300 mm | ||
主轴上下行程（Y轴）The upper and lower travel (Y axis) | 800 mm | 1040 mm | 1300 mm | 1300 mm | ||
主轴左右行程(Z轴) Spindle and travel (axis) | 830 mm | 1230 mm | 1650 mm | 2050 mm | ||
机床功率Machine power | ||||||
主轴电机Spindle motor | 7.5kw | 7.5kw | 7.5kw | 7.5kw | ||
X轴电机x axis motor | 2kw | 2 kw | 2.9 kw | 2.9 kw | ||
Y轴电机y axis motor | 2 kw | 2 kw | 2.9 kw | 2.9 kw | ||
Z轴电机z axis motor | 1.3 kw | 1.3 kw | 1.3 kw | 1.3 kw | ||
高低压汞电机High and low pressure mercury mercury motor | 11.2kw | 11.2kw | 11.2kw | 11.2kw | ||
机床总功率Machine total power | 24kw | 24kw | 26kw | 26kw | ||
加工速度Processing speed | ||||||
主轴最高转速Maximum speed of spindle | 4500rpm | 4500rpm | 4500rpm | 4500rpm | ||
切削进给速度Cutting feed speed | 1-150mm/min | 1-150mm/min | 1-150mm/min | 1-150mm/min | ||
工作台Bench | ||||||
负重Load | 7ton | 9 ton | 10 ton | 12 ton | ||
面积The measure 偶发area | 900*650mm | 1160*900 mm | 2200*1400 mm | 2400*1600 mm | ||
机床冷却系统Machine cooling system | ||||||
高低压汞压力范围High and low pressure mercury pressure range | 2-100kg/cm² | 2-100kg/cm² | 2-100kg/cm² | 2-100kg/cm² | ||
出油量范围The oil out put range | 6-42L/min | 6-42L/min | 6-42L/min | 6-42L/min | ||
机床尺寸Dimensions the machine | 5600*3000*2550 | 6000*3300*2750 | 6500*5600*3000 | 6700*5800*3000 | ||
机床重量Weight of machine tool | 6ton | 8ton | 15.5ton | 17ton | ||
标志配件Standard accessories | ||||||
三轴日本伺服电机及驱动器Three axis servo motor and drive 台湾BT40 8000RPM主轴The Taiwan BT40 8000RPM spindle 切削油冷却系统Cutting oil cooling system | 油压系统Hydraulic system排屑机Chip machine 枪转库Gun drill | 高/低压汞Highlow pressure mercury 枪钻、导套各1件Gun drill, a guide sleeve 1pieces 工具箱Toolbox | ||||
图片
